BQHBC - PACKAGED ROOFING ASPHALTS ASTM D 312 TYPE III
- MSDS: BQHBC
- Manufacturer: GAF BUILDING MATERIALS CORP
- Product Name: PACKAGED ROOFING ASPHALTS ASTM D 312 TYPE III
- National Stock Number: 5640-00F025926
Product Identification
Product ID:PACKAGED ROOFING ASPHALTS ASTM D 312 TYPE III
MSDS Date:01/26/1990
FSC:5640
NIIN:00F025926
MSDS Number: BQHBC
Responsible Party
WAYNE, NJ 07470-3689
US
Emergency Phone: 201-628-3841
Info Phone: 201-628-4092
Preparer: P J HENNINGS
Cage: 24291
Contractor
Telephone: 201-628-4092
Cage: 24291
Ingredients
ASPHALT FUMES, ASPHALT, CUTBACK ASPHALT
CAS: 8052-42-4
RTECS: CI9900000
Fraction By Weight: 100%
ACGIH TLV: 5 MG/CUM
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: IRRITATION & BURNS OF
THROAT & MUCOUS MEMBRANES FROM HOT ASPHALT. SKIN/EYES: IRRITATION &
BURNS FROM HOT ASPHALT.
Explanation of Carcinogenicity:NONE
Medical Cond Aggravated by Exposure:RESPIRATORY DISORDERS
First Aid
First Aid:EYES: FLUSH W/FLOWING WATER FOR 15 MINS. SKIN: COOL W/ICE OR
WATER. DON'T ATTEMPT TO REMOVE ASPHALT IMMEDIATELY. COVER
W/PETROLEUM JELLY (VASELINE) & REMOVE WHEN ASPHALT SOFTENS.
INHALATION: REMOVE TO FRESH AIR & PROVIDE OXYGEN IF BREATHING IS
DIFFICULT. INGESTION: OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:COC
Flash Point:>500F
Extinguishing Media:CO2, FOAM, OR DRY CHEMICAL IS PREFERRED. WATER FOG
MAY BE USED ON FLAT SURFACES.
Fire Fighting Procedures:TREAT AS A FUEL OIL FIRE. WEAR SELF-CONTAINED
BREATHING APPARATUS & FULL PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:TEMPERATURES >500F MAY CAUSE A FIRE OR
EXPLOSION HAZARD.
Accidental Release
Spill Release Procedures:CONTAIN SPILLS W/SAND OR SOIL UNTIL
SOLIDIFIED. PREVENT RUN-OFF TO SEWERS, STREAMS, OR OTHER BODIES OF
WATER. WEAR PROTECTIVE CLOTHING.
Handling
Handling and Storage Precautions:DON'T STORE ASPHALT IN TANKS OR
EQUIPMENT THAT CONTAIN WATER, SOLVENTS, OR OTHER HAZARDOUS
MATERIALS.
Other Precautions:AVOID BREATHING FUMES.
Exposure Controls
Respiratory Protection:IF TLV IS EXCEEDED, USE NIOSH APPROVED
RESPIRATOR.
Ventilation:NATURAL VENTILATION: TO MAINTAIN EXPOSURE BELOW TLV.
Protective Gloves:HEAT RESISTANT
Eye Protection:SAFETY GLASSES W/SIDE SHIELDS
Other Protective Equipment:LONG SLEEVE SHIRT & LONG TROUSERS (BOTH
W/MINIMAL SYNTHETIC FIBER CONTENT), SOLID WORK SHOES
Work Hygienic Practices:WASH HANDS AFTER WORKING W/ASPHALT.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:>800F
Melt/Freeze Pt:M.P/F.P Text:230-245F
Spec Gravity:1
Solubility in Water:INSOLUBLE
Appearance and Odor:BLACK SOLID AS SUPPLIED, ASPHALTIC ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
WATER, STRONG OXIDIZING AGENTS
Stability Condition to Avoid:TEMPERATURES >500F, FIRE
Hazardous Decomposition Products:CO, CO2, SMALL AMOUNTS OF HYDROGEN
SULFIDE, WHICH IS A FLAMMABLE, TOXIC GAS.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.